Hagstrom’s Viking® is established as the most versatile semi-hollow guitar on the market today, delivering a wide variety of tonal color to an incredible diversity of musical styles.
A natural step for us was to extend the Viking’s® voice to a deep, resonant baritone. Many guitarists consider a baritone instrument to be somewhat limited and narrow in its application, but Hagstrom’s Viking® Baritone shatters this stereotype.
Two entirely new Hagstrom pickups were developed specifically for the Viking® Baritone’s rich acoustics, adding shading and enhancement to deliver a broad spectrum of sonic colorings. In the bridge position we find Hagstrom’s new Custom 58’C, a semi-open-coiled humbucker voiced to enhance the ringing clarity native to the Viking®, even in its lowest sub-registers. Sitting in the neck position is Hagstrom’s new P-Urified pickup, a specially designed full-humbucking-sized P90 pickup, adding warmth and openness while keeping lower frequencies tight and controlled.
The result is a tonal continuum from clean and classic 1960’s sounds, to “Spaghetti Western” twang, through the overdriven crunch of the 1970’s and 1980’s and on to the “Über-Driven” tones demanded by today’s players. All of these sounds are built on top of the Viking® Baritone’s gorgeously deep, distinctive acoustic voice.
All Hagstrom electric guitars and basses include our patented H-Expander™ truss rod. Providing tension at both ends and running the entire length of the neck, the rigid yet light-weight alloy truss rod allows for a very low action and thin neck, two factors that were instrumental in earning Hagstrom its reputation as the world’s fastest playing guitar. The H-Expander™ truss rod not only provides ultimate neck stability, but it also contributes to Hagstrom’s unique tone. Longer sustain and a round attack are some of the sonic characteristics the H-Expander™ adds to the tonal essence of Hagstrom.
Hagstrom models use 18:1 or 15:1 gear ratio machine heads based on our own designs to insure accurate tuning. Viking® and HB series basses feature machine heads with a 17:1 gear ratio.
Resinator™ wood is a wood composite material that is both more uniform in density and more stable than any standard wood product. These characteristics eliminate dead spots or “wolf tones” sometimes associated with conventional wood fingerboards. Resinator™ wood has an articulate sound similar to high quality ebony, but without any of the problems associated with ebony. It provides a stable and clear tone, and also adds higher overtones and harmonics which uniquely detail each note. Like our H-Expander™ truss rod, Resinator™ wood is a major contributor to the distinctive “Hagstrom tone”.
Hagstrom uses a variety of different neck joints throughout our range. Our set-neck recipe is the classic and time-tested Mortise and Tenon joint, a design that most efficiently transfers string energy from neck to body, and can often only be found on more expensive custom-built guitars. A team of experienced and dedicated craftsmen hand carves every neck joint, insuring perfect execution of this traditional technique preferred by luthiers for generations.
|Body||Ply Flamed Maple|
|Neck||Canadian Hard Maple, Set Neck, long Mortise & Tenon neck joint|
|Scale Length||28" (711 mm)|
|Frets||22 Medium Jumbo|
|Nut||GraphTech Black Tusq XL|
|Nut Width||43 mm|
|Pickup Neck||P-Urified Neck Humbucking sized P-90|
|Pickup Bridge||Custom 58’C|
|Switch||3-Way Toggle Switch|
|Controls||2 x Volume / 2 x Tone|
|Bridge||Long Travel Tune-O-Matic with Hagstrom Stop Tail|
|Tuning Keys||Hagstrom Design 18:1|
|Strings||D'Addario EXL 158 (13-62)|