HJ500 Jazz Guitar by Hagstrom Guitars of Sweden

Home / Electric Guitars / Jazz Models / HJ500

Hagstrom HJ500

In 1969 the legendary luthier James “Jimmy” D’Aquisto began a cooperation with Hagstrom that was to last nearly 10 years. Hagstrom’s hollow-body archtop jazz guitar series is the result, and the master’s craft is unmistakably written all over these fine instruments. In fact, the asymmetrical headstock used for these guitars and now used for most current Hagstrom models, was Jimmy’s design. Immaculately clean, well rounded jazz tones for single note patterns and walking-bass chordal comping are the HJ500’s home turf, although it is fully capable of taking a different route into rock-oriented soundscapes when necessary.

Colors

Hagstrom Jazz HJ500 Detail natural gloss mahogany

The minute you lay your hands on a Hagstrom and strum it for the first time, you can instantly feel why Hagstrom has legions of devoted fans and why so many pro musicians have made it their “number one”.

HJ500 Specs

Body

Material: Canadian Maple
Top: Contoured
Style: Hollow-Body

Neck

Joint: Set Neck
Material: Canadian Hard Maple
Truss Rod: H-Expander™

Fingerboard/Nut

Material: Resinator™
Radius: 15"
Inlays: Pearl Block
Frets: 22 Medium Jumbo
Scale Length: 24,75" (628 mm)
Nut: GraphTech Black Tusq XL
Nut Width: 43 mm

Electronics

Pickups: 2 x Hagstrom HJ-50
Pickup Selector: 3-Way Toggle Switch
Controls: 2 x Volume / 2 x Tone

Parts

Bridge: Ebony Jimmy with Hagstrom Trapeze Tail Piece
Tuning Keys: Hagstrom Design 18:1
Strings: D'Addario EXP 115 (11-49)

Optional Cases

Bag E26
Case C56

Download

Jazz Model Wiring Diagram (.PDF) 230 K

HJ500 Standards

H-Expander

All Hagstrom electric guitars and basses include our patented H-Expander™ truss rod. Providing tension at both ends and running the entire length of the neck, the rigid yet light-weight alloy truss rod allows for a very low action and thin neck, two factors that were instrumental in earning Hagstrom its reputation as the world’s fastest playing guitar. The H-Expander™ truss rod not only provides ultimate neck stability, but it also contributes to Hagstrom’s unique tone. Longer sustain and a round attack are some of the sonic characteristics the H-Expander™ adds to the tonal essence of Hagstrom.

Hagstrom Machine Heads

Hagstrom models use 18:1 or 15:1 gear ratio machine heads based on our own designs to insure accurate tuning. Viking® and HB series basses feature machine heads with a 17:1 gear ratio.

Resinator Wood

Resinator™ wood is a wood composite material that is both more uniform in density and more stable than any standard wood product. These characteristics eliminate dead spots or “wolf tones” sometimes associated with conventional wood fingerboards. Resinator™ wood has an articulate sound similar to high quality ebony, but without any of the problems associated with ebony. It provides a stable and clear tone, and also adds higher overtones and harmonics which uniquely detail each note. Like our H-Expander™ truss rod, Resinator™ wood is a major contributor to the distinctive “Hagstrom tone”.

Trapeze Stringholder/Tailpiece

The classic Viking® trapeze stringholder/-tailpiece design, is a work of art in itself. Right underneath the top part, where the two beautifully swept beams meet, it features a string claw for easy access and super comfortable string changes. Adorned with the legendary Hagstrom crest it truly is elegance defined.

Set Neck

Hagstrom uses a variety of different neck joints throughout our range. Our set-neck recipe is the classic and time-tested Mortise and Tenon joint, a design that most efficiently transfers string energy from neck to body, and can often only be found on more expensive custom-built guitars. A team of experienced and dedicated craftsmen hand carves every neck joint, insuring perfect execution of this traditional technique preferred by luthiers for generations.

HJ500

Hagstrom HJ500

Colors

HJ500 Specs

Body

Neck

Fingerboard/Nut

Electronics

Parts

Optional Cases

Download

Jazz Model Wiring Diagram (.PDF) 230 K

HJ500 Standards

H-Expander

Hagstrom Machine Heads

Resinator Wood

Trapeze Stringholder/Tailpiece

Set Neck

Hagstrom Guitars

Stories

Your Hagstrom

Guitars

Basses

Acoustic Guitars