Swede by Hagstrom Guitars of Sweden

Home / Electric Guitars / Swede / Swede NewGen

Hagstrom Swede

The Swede with a shorter scale length of 24.75 inches (628mm) produces a thick and warm tone that is both articulate and harmonically rich. Its lower string tension allows for longer sustain, providing an expressive and versatile tone. The equipped Lundgren Design No. 2 AlNiCo-2 pickups are each specially calibrated to capture the natural, balanced tone of the instrument. With their clear and well-defined distinction, these pickups allow the soulful character of the Swede to shine through.

Colors

“Can't go wrong with my faithful Hagstrom Swede. Not too many guitars out there anyway that withstand the constant beating I put them thru! She's a taker, sharing all of my road life's antics. Get a Hagstrom Swede, be inspired, you'll never look back.”

Swede Specs

Body: Mahogany
Top: ¾” Carved Maple Top w/ Top Grade Flame Maple Veneer
Binding: Single-Ply Ivory
Style: Single Cutaway
Neck: Mahogany
Neck: Set Neck, customized Nape-Tenon neck joint for ultimate fret access
Neck Thickness: 1st fret 21 mm (excludes FB, paint clear coat), 12th fret 22.5 mm (excludes FB, paint clear coat)
Trussrod: Dual Action H-Expander™
Fingerboard: Resinator™
Scale Length: 24.75” (629 mm)
Radius: 14.4“
Inlays: Ivoriod Hagstrom Crest inlays – Lions on 12th fret
Position Marks: Hagstrom Crest inlays – Hagstrom Lions on 12th fret
Frets: Stainless Steel - 22 Medium Jumbo
Nut: Custom String Spaced - GraphTech™ Black Tusq XL
Nut Width: 43 mm
Headstock Reinforcement: Volute with internal reinforcements
Pickup Neck: Lundgren Design AlNiCo-2 No. 2 (Medium Output – Calibrated – 7.3K) Humbucker - Splitable
Pickup Bridge: Lundgren Design AlNiCo-2 No. 2 (Medium Output – Calibrated- 8.3K) Humbucker - Splitable
Switch: 3-Way Toggle Switch w/Hagstrom Brass Plated Cap (Chrome Plated)
Controls: 2 x Volume Control with R/C Circuit, 2 x Tone Control with Push-Pull Coil Splits
Tuning Keys: Hagstrom Bottom Locking – 19:1 Ratio Chrome Tuners w/Hagstrom Tuning Buttons
Stop tail: Hagstrom Direct Mounted Sustain Blocks, Plexi Glass Plate, with Chrome Cover
Bridge: Long Travel Tune-O-Matic Bridge
Knobs: 4 x Hagstrom “H” Barrel Knurled Brass Knobs (Chrome Plated)
Pickguard: Single Ply Ivory or 3-ply Black/White/Black
Pickup Frames: Hagstrom Standard Pickup Frames
Strap Buttons: Set of 3, with dual mount at base of body
Strings: D’Addario (10-46)
Case: Included C-51
Optinal Gigbag: E-20

Swede Standards

H-Expander NewGen

All Hagstrom electric guitars and basses include our patented H-Expander™ truss rod design. Introduced with the new Swede and Super Swede models and coupled with a dual action truss rod, making adjustments even more accurate, it is fit for a whole new generation of players while retaining Hagstrom’s reputation as the world’s fastest playing guitar. The H-Expander™ truss rod not only provides ultimate neck adjust- and stability, but it also contributes to Hagstrom’s unique tone. Longer sustain and a round attack are some of the sonic characteristics the H-Expander™ adds to the tonal essence of Hagstrom.

Resinator Wood

Resinator™ wood is a wood composite material that is both more uniform in density and more stable than any standard wood product. These characteristics eliminate dead spots or “wolf tones” sometimes associated with conventional wood fingerboards. Resinator™ wood has an articulate sound similar to high quality ebony, but without any of the problems associated with ebony. It provides a stable and clear tone, and also adds higher overtones and harmonics which uniquely detail each note. Like our H-Expander™ truss rod, Resinator™ wood is a major contributor to the distinctive “Hagstrom tone”.

Locking Machine Heads by Hagstrom

A variety of Hagstrom instruments include 19:1 gear ratio locking machine heads based on our own distinct innovations to enable highly accurate tuning, fewer wraps around the tuning post, and hence faster string changes.

Sustain Block Tailpiece

Hagstrom’s unique Sustain Block Tailpiece™ was the result of design work starting in 1976 and made its first appearance on Swede and Super Swede guitars produced in 1978. Since then it has been a signature feature on many of our solid body models. Each string terminates in a single, massive brass block coupled directly to the guitar’s body. The blocks are detached from one another to reduce interference between the strings, maximizing each string’s unique contribution.

Nape-Tenon Body Neck Joint

The body and neck joint is a vital part of stringed instruments. When done correctly, it allows for a seamless flow of tone, energy, and resonance. Hagstrom has developed an innovative neck joint design called the "Nape-Tenon", which combines the custom shop proven mortise and tenon design with a recessed neck body joint for ultimate upper fret access.

Stainless Steel Fret Material

Although this construction process may take more time and effort, we firmly believe that shortcuts are not an option when striving for excellence. Hence the use of stainless steel frets, which provide a hassle free lifetime of performance and ensure optimal intonation and playability.

Swede

Hagstrom Swede

Colors

Swede Specs

Swede Standards

H-Expander NewGen

Resinator Wood

Locking Machine Heads by Hagstrom

Sustain Block Tailpiece

Nape-Tenon Body Neck Joint

Stainless Steel Fret Material

Hagstrom Guitars

Stories

Your Hagstrom

Guitars

Basses

Acoustic Guitars